1
TAP or SCAN the product
Depending on which product you have, scan the QR code or tap the NFC to get started.
Scan QR code:
Open the camera on your phone and point to QR code
Tap NFC:
Using an NFC-enabled phone, unlock the screen. Hold it to the Trippi Glow logo for 1–2 seconds.
Where you tap depends on the phone:
- iPhone: The reader is at the top of the phone, near the camera. Aim the top edge at the logo.
- Samsung / Android: The reader is on the back, usually in the center, sometimes slightly higher. Place the back of the phone flat against the logo. Turn NFC on in Settings first.
Hold still. Don’t swipe. If nothing appears, nudge the phone a little and try again. Thick cases can block the signal.